Bluelab Combo Meter

The Bluelab Combo Meter measures temperature, conductivity, and pH in one convenient device.
The Bluelab Combo Meter will soon tell you if each parameter is within the plant's requirements, which is helpful if you've noticed problems like yellowing leaves or poor, stunted growth.
The crop can be swiftly brought back on track by making the necessary adjustments.

Besides the Bluelab pH Probe, the Bluelab Conductivity/Temperature Probe is included with the Bluelab Combo Meter.
To take a reading, just drop them into the liquid, and the screen will update to show the result.
The daily fertiliser needs of your plants can be managed no matter where you are, thanks to the Bluelab Combo Meter's portability and lack of a need for an external power source.

The pH probe may be calibrated quickly and easily with the meter's on-board instructions and the simple push-button procedure.

After inserting the pH Probe and Conductivity/Temperature Probe into the solution, the desired reading is shown digitally. A big, legible screen is one of its many perks.
The Bluelab Combo Meter can measure temperature (in °C or °F), conductivity (in EC or CF units), nutrient concentration (in ppm 500 or ppm 700), and pH.

Using the meter's push buttons and some new calibration solutions, adjusting the pH level is a breeze. Calibration is unnecessary for conductivity and temperature because they are set during production.

The pH probe can be swapped out, extending the life of the metre significantly. Since the conductivity/temperature probe's readings are fixed during production, no calibration is necessary.
The Bluelab Combo Meter may be used whenever and wherever you need it because it is battery-operated and compact.
pH probe with a replaceable double junction
Indicators for exceeding and falling below a given range
Ability to turn off automatically
Message indicating low battery life.
Included are 2 AAA alkaline batteries.